45 Installing the hardware
Mounting a Base Station Module
COMPANION 200 Installation and Maintenance Guide
Figure 15: Base Station Module
Power cord
When you are mounting a Base Station Module, ensure that you:
• Allow suitable wall space for future expansion.
• Check that the requirements for the environment and for the
power source are met (see the Technical Specifications section
for specifications).
Note: The Controller, Line Modules and Base Station Modules can
be mounted in any order.
Power-on light
Optical port
RJ21 connector latch
RJ21 connector
(ports x01–x16)
Cable clip
Cable trough
P0725810 Issue 3.0