Nortel Meridian Companion Installation And Maintenance Manual page 130

131 Maintenance
Table 16: Event messages (continued)
Event code
EVT 419
EVT 434
EVT609
EVT629
EVT832
EVT834
EVT-848-0103
EVT849
EVT850
EVT851
EVT858
EVT871
EVT882
EVT940
COMPANION 200 Installation and Maintenance Guide
Meaning
The system time has been changed by a user.
The register password has been changed.
No software emulator is running.
Timer error.
System problem with locating portables.
System problem with locating portables.
Handoff failure. A few of these can occur per day as a result of normal
operation. If more than ten are logged per day, further investigation is
suggested.
Synchronization error.
Synchronization error.
Base Station software error.
Network manager internal software error.
Base Station download is complete
A re-evaluation has been initiated. Precedes the
the Event/alarm log.
A terminal is reporting an error to the maintenance software.
You should rarely see event messages other than those described
above. Other messages occur when the COMPANION 200 has
followed its normal recovery from an unusual combination of
system events. If the same event number keeps appearing, report it
to the installer or service representative.
As a result of some events, the COMPANION 200 automatically
restarts itself. The following messages are associated with a system
restart: 101–106, 108–112, 114–116, 118–120, 124–125, 130, 133–
134, 137, 151, 223–224, 229, 266–267, 285–298, 400, 426–430,
432, 600–602, 614, 630, 803, 808, 810, 823.
alarm in
Re-eval in prog
P0725810 Issue 3.0