Nortel Meridian Companion Installation And Maintenance Manual page 46

47 Installing the hardware
COMPANION 200 Installation and Maintenance Guide
Figure 16: Mounting bracket for the Base Station Module
3. Slide the Base Station Module down onto its mounting bracket.
4. Open the cable trough door and allow it to swing down.
5. Use two 38-mm screws to fasten the cable trough to the wall as
shown in the following illustration.
Figure 17: Fastening the Base Station Module cable trough
6. Close the door of the cable trough. Do not connect power.
P0725810 Issue 3.0