Nortel Meridian Companion Installation And Maintenance Manual page 41

P0725810 Issue 3.0
Figure 12: Mounting bracket for the Line Module
3. Slide the Line Module down onto its mounting bracket.
4. Open the cable trough door and allow it to swing down.
5. Use two 38-mm screws to fasten the cable trough to the wall as
shown in the following illustration.
6. Close the door of the cable trough. Do not connect power at this
point.
Figure 13: Fastening the Line Module cable trough
COMPANION 200 Installation and Maintenance Guide
Installing the hardware 42