Maintenance; Entering A Maintenance Session - Nortel Meridian Companion Installation And Maintenance Manual

112

Maintenance

Maintenance is a COMPANION 200 software feature that helps you
diagnose problems that may arise within the COMPANION 200
system. The steps for entering and ending a Maintenance session are
included on this page.
This section documents maintenance of the COMPANION 200
using the Administration Terminal. You will find a summary of
Administration Terminal maintenance in Appendix C.
Part of the Maintenance function is to display alarm messages. This
section also explains the various alarm and event messages.
There are five Maintenance tasks you can carry out:
• Verifying the system version.
• Checking the port status.
• Checking module status.
• Checking the Event/Alarm log.
• Checking the Administration log.
Note: The Event/Alarm log and the Administration log should be
verified, recorded, and erased periodically.
While running Maintenance, you can record your results in the
COMPANION 200 Programming Record.

Entering a Maintenance session

To enter a Maintenance session:
1. Press ƒ••¤flfl‹››. The display shows
Password:.
P0725810 Issue 3.0 COMPANION 200 Installation and Maintenance Guide