Installing the Controller
P0725810 Issue 3.0
Installing the hardware
The Controller comes with a Power Supply Unit already installed. It
has a detachable power cord to connect it to an ac outlet. Cables to
and from the Controller are routed through the Controller's
integrated cable trough. The Controller has one slot for a Software
Cartridge, two slots for Expansion Cartridges and two slots for Line
Cartridges.
When installing a Controller, Line Modules, and Base Station
Modules in a row, install all the mounting brackets before installing
the equipment. This will ensure optimum use of wall space.
COMPANION 200 Installation and Maintenance Guide
32