Figure 13 Sfp Fiber Optic Module Fiber Optic Cable Insertion And Removal - Nortel 1800 Installing

To remove the SFP module fiber optic cable connector from the SFP module:
1
Press down on the retaining tabs on the fiber optic cable connectors.
2
Gently pull the outer plastic casing away from the SFP module.
The connectors on many SFP fiber optic cables are grouped in pairs with a
small plastic tab you can use to press both connector tabs at the same time.
This allows you to remove both cable connectors as a group.
Figure 13 displays the insertion and removal of the SFP fiber optic cables from a
SFP module.

Figure 13 SFP fiber optic module fiber optic cable insertion and removal

Inserting and removing an SFP GBIC fiber optic cable
Installing the Metro Ethernet Services Unit 1800
43