Cables And Harnesses In Lower Electronic Enclosure - GE Datex-Ohmeda Aisys Carestation Reference Manual

Aisys

10.36 Cables and harnesses in lower electronic enclosure

10-60
Item Description
1 Cable, to M-Gas (Airway module) power supply
2 Cable, to Display Unit system power interface
3 Cable, to Display Unit system signal interface
4 Harness, J3-PCB to J5-DCB
5 Cable, ribbon J2-ACB to J9-DCB
6 Harness, J7-ACB to J6-DCB
7 Cable, ribbon J1-ACB to underside of Pan Connector Board
8 Harness, J3-ACB to underside of Pan Connector Board
9 Harness, J6-ACB to J4-PCB
10 Harness, (flex cable) battery
11 Harness, Power Supply to PCB
12 Harness, PCB to AuxCB
13 Harness, DCB to AuxCB
14 Cable, S/5 AM Pwr Comm
(
F-CU8, Rev 10 or greater, required for battery backup
of 12 inch AM Display
15 Cable, On-Standby RS232
)
Stock Number
1011-3549-000
1011-3547-000
1011-3548-000
1009-5552-000
1009-5561-000
1009-5556-000
1011-3186-000
1011-3199-000
1009-5551-000
1011-3698-000
1011-3591-000
1011-3590-000
1011-3582-000
1011-3593-000
1009-5935-000
04/08 M1046983