Cal Config - GE Datex-Ohmeda Aisys Carestation Reference Manual

Aisys

5.4.1 Cal Config

5-12
Before calibration, you must verify that the Ventilator Drive Gas and the
Altitude settings are set appropriately to match the current drive gas
configuration and machine location.
If you change any of the settings in the Cal Config menu, you must restart the
system.
3. On the Installation menu, select Configuration.
4. On the Configuration menu, verify the Ventilator Drive Gas and the
Altitude setting; adjust as necessary.
5. When done, reboot the system (System switch to Standby; then On).
04/08 M1046983