Calibration - GE Datex-Ohmeda Aisys Carestation Reference Manual

Aisys

4.5 Calibration

4-18
For step-by-step instruction, refer to Section 5.4, "Ventilator Calibrations."
Menu Item
Instructions
Spiro Calibration
User Calibration
Manifold P Span
<*> Insp Flow Valve
Insp Flow Zero
Bleed Resistor
Paw Span
Zero Gas Xducrs
Cal Config
Mixer P Zero
Previous Menu
<*> Not present in System Software 4.X of greater.
Message text
These values are used for calibration:
Ventilator drive gas - Air or O2
Altitude - XXXX m
Change these values on the Cal Config menu
Check gas module spirometry gains.
Blocking message:
Insert gas module with spirometry
Show the normal user calibration menu.
Calibrate manifold pressure transducer.
Calibrate inspiratory flow valve.
Zero inspiratory flow valve.
Calibrate bleed resister flow.
Calibrate the airway pressure transducer.
Calibrate the gas supply transducers.
Set vent drive gas and altitude.
Zero mixer pres transducer.
Return to previous menu.
04/08 M1046983