Vent Subsystem Menu; Vent Subsystem Vent Status - GE Datex-Ohmeda Aisys Carestation Reference Manual

Aisys

12.9 Vent Subsystem menu

12.9.1 Vent Subsystem
12-26
The Vent Subsystem menu includes the following menu items:
• Vent Schematic (Section 12.3.3)
• Vent Status (Section 12.9.1)
• Vent Flow and Pressure (Section 12.9.2)
—
Vent Status
Vent Status
Label
Vent Drive Gas
ABS Installed
Flush Valve
<*> CO2 Bypass
O2 Cell Status
Bag/Vent Switch
Circuit Feedback
Over Pressure Circuit
ACGO/SCGO Config
Gas Inlet Valve Feedback
<*> This refers to the Canister Release switch. The value defaults to Closed if the switch kit
is not installed (refer to section 10.39).
Value
Air or O2
Installed or Not Installed
Not Pressed or Pressed
Closed or Open
Connected or None
Bag or Vent
Circle, Non-circle, or fault
OK or High-Pressure
ACGO or SCGO
Open or Closed
04/08 M1046983