Cable Routing, Lower Module Rack - GE Datex-Ohmeda Aisys Carestation Reference Manual

Aisys

6.12 Cable routing, lower module rack

Note
Cable runs behind
rear cosmetic panel
Cables run behind
right side panel
Battery Backup for
12 inch AM Display
Auxiliary
Connector
Board
AC Mains
6-20
The following diagram shows typical cable connections for Aisys machines with an
lower module rack. Refer to the individual sections showing proper routing of the
cables through the machine.
In general, route the cables through the machine as shown in the following sections.
Connect each end to the intended connector. Ensure that the cable is properly
restrained and positioned so that it does not interfere when replacing covers or with the
motion of the Display arm. Store excess cable length within the machine.
F-CU8 (Rev 10)
Display Connector Board
Lower Electrical Cabinet
MGAS
15 inch AM Display
Control Bar
DU
Cables through ARM
Cables run behind
left side panel.
04/08 M1046983