GE Datex-Ohmeda Aisys Carestation Reference Manual page 323

M1046983 04/08
6. Remove the four screws (circled) that hold the LCD to the mounting plate.
7. Lift the left side of the LCD display slightly away from the mounting plate to pull some
of the display ribbon cable (I) to the top side of the plate. Flip the LCD over to the left
of the assembly.
8. Disconnect the display ribbon cable (J).
LCD
Display
9. Reassemble in reverse order.
Note: When replacing the LCD, pull the excess ribbon cable to the bottom side of the
plate as you lower the LCD on to the plate. For the backlight harness grommet (H),
ensure that the slit in the grommet faces toward the inside of the keyhole.
J I
9 Repair Procedures
H
G
9-27