Replace System Switch Assembly - GE Datex-Ohmeda Aisys Carestation Reference Manual

9.10 Replace system switch assembly

M1046983 04/08
1. Move the dashboard forward to the service position (Section 9.6).
2. Disconnect the wires from the electrical switch.
3. Back out the system switch mounting screws just enough to allow the knob collar to
be released.
4. While holding the switch assembly, push in the knob and turn it counterclockwise.
5. Pull the knob and collar out from the front and remove the switch assembly.
System Switch
(electrical)
9 Repair Procedures
Gauge panel
9-21