Table of Contents
Advertisement
Innova 2100-IQ, 3100/3100-IQ, 4100/4100-IQ Cardiovascular Imaging System Pre-Installation Manual
GE Healthcare
3.4.5 Cable Support for Monitor Cables
A cable support (cable drape) is provided with an Innova LC System.
The cable support kit contains:
•
1 B2054 EK (Drape with 3 M Bridge, on suspensions for X-Ray tubes and monitors,
contains 8 FT 6 inch track, three carriers, and mounting hardware)
•
1 B2055 ED (stationary rail parts)
NOTE:
In Americas the Cable Support Kit must be provided locally by the Customer (e.g. CPGE55
from Unistrut).
3.5 Walls
3.5.1 General requirement
The C1 Cabinet, the C2 Cabinet, and the PDB Cabinet must be securely fastened to the
wall to prevent them from tipping.
3.5.2 Seismic Areas
NOTE:
For Fluoro UPS option (US version only), the Fluoro UPS supplier will deliver anchoring
brackets (see
Consider local seismic codes when planning cabinet mounting. Consult seismic expert to
determine which mounting method is appropriate for the seismic region. Certain seismic
regions require additional reinforcement in walls. See
System Compatability for referential documents.
Illustration 3-13:
Refer to Calculations for Seismic Anchoring Information.
Chapter 3 Physical Requirements of Room
Illustration 3-13
). The bolts will be provided by the customer.
Direction 5314528-2-1EN, Revision 1
Chapter 2, Section 3,
Basic Innova LC
71
Advertisement
Table of Contents
