Aisys
1.8 Symbols used in the manual or on the equipment
m
On (power)
L
Off (power)
l
Standby
n
Standby or preparatory state for part of
the equipment
M
"ON" only for part of the equipment
N
"OFF" only for part of the equipment
†
Direct current
p
Alternating current
x
Protective earth ground
y
Earth ground
P
Frame or chassis ground
Y
Equipotential
1-12
Symbols replace words on the equipment, on the display, or in Datex-Ohmeda
manuals. No one device or manual uses all of the symbols.
Warnings and Cautions tell you about dangerous conditions that can occur if
you do not follow all instructions in this manual:
• Warnings tell about a condition that can cause injury to the operator or the
patient.
• Cautions tell about a condition that can cause damage to the equipment.
Read and follow all warnings and cautions.
A
J
D
w
wW
O
Alarm silence
Alarm silence
j
Type B equipment
Type BF equipment
Type CF equipment
Caution, ISO 7000-0434
Attention, refer to product instructions,
IEC 60601-1
Dangerous voltage
Electrical input
Electrical output
Pneumatic input
Pneumatic output
04/08 M1046983