GE Datex-Ohmeda Aisys Carestation Reference Manual page 228

Aisys
Error Log Entry
Action/Troubleshooting
ACB EEPROM FAIL
Reboot System. If problem continues, replace the ACB.
ACB FLASH FAIL
Reboot System. If problem continues, replace the ACB.
ACB HW WATCHDOG
Reboot System. If problem continues, replace the ACB.
ACB MICROPROC
ERROR
Reboot System. If problem continues, replace the ACB.
ACB RAM ERROR
Reboot System. If problem continues, replace the ACB.
ACB REDUNDANT
MEMORY FAIL
Reboot System. If problem continues, replace the ACB.
ACB SW ERROR
Reboot System. If problem continues, reload ACB Software.
If problem continues, replace the ACB.
ACB SW WATCHDOG
Reboot System. If problem continues, replace the ACB.
ACB UNEXPECTED
RESET
Reboot system. If problem continues, replace the ACB.
ACGO
No Service Action Required.
ACMains POWER FAIL
No Service Action Required.
7-46
Alarm Text Condition (Basic info)
Memory (EEPROM) Read/Write failure or CRC
failure failure of the EEPROM located
on the Anesthesia Control
Board.
System Malfunction CRC Failure in code space.
System Malfunction Hardware watchdog fails boot
up test, times out, or detects
an incorrect code sequence.
System Malfunction Unexpected microcontroller
exception (bus error, address
error, etc.).
System Malfunction Memory Test Failure, Multiple
bit errors detected.
System Malfunction A redundantly stored
parameter could not be
stored properly or was
corrupted.
System Malfunction Unexpected software error
System Malfunction Software watchdog failed
power-up test, timed out, or a
software function was
delinquent for too long.
System Malfunction Unexpected reset of AC
Vol and Apnea Non Circle (ACGO) selected
monitoring off
Plug in power cable. ACMains_GOOD goes and
On battery stays low for at least 300
msec (3 software loops)
Priority Source Enabling Criteria
Low AC
High AC
High AC
High AC
High AC
High AC
High AC
High AC
High AC
Low DC System has ACGO
Medium PC 30 minutes of battery
power available.
04/08 M1046983