JANUS 2010 Hand-Held Computer User's Manual
nugget
Scanner Timeout (continued)
2. Scan a numeric value for data from these bar codes:
3. Scan this bar code:
Scanner Trigger
Purpose:
Scanner trigger allows you to set level triggering or edge triggering.
• With level triggering, you pull the trigger and the laser turns on and stays
• In edge triggering, you pull the trigger and the laser turns on and stays on.
Default:
Level triggering
Syntax:
SCdata
Acceptable values for data are:
0
1
12-88
3 9
helconital
*0*
*0*
*2*
*2*
*4*
*4*
*6*
*6*
*8*
*8*
Exit Accumulate Mode
*-/*
*-/*
on until you release the trigger.
When you pull the trigger a second time, the laser turns off. Simply
releasing the trigger does not turn the laser off. If the laser is left on, the
scanner timeout turns the laser off.
Level triggering
Edge triggering
*1*
*1*
*3*
*3*
*5*
*5*
*7*
*7*
*9*
*9*