Managing The Pc Card Drivers In The Startup Files; Drivers In Config.sys - Intermec Janus 2010 User Manual
Intermec janus 2010: user guide
Hide thumbs
Also See for Janus 2010:
- Reference manual (250 pages) ,
- User manual (112 pages) ,
- Manual (15 pages)
Table of Contents
Advertisement
To turn on the power to the PC card drive
• When you are ready to use the modem card, type this command:
Managing the PC Card Drivers in the Startup Files
The PC card drivers and utilities are stored on the JANUS reader and the
Application companion disk 3. These files control how the PC card drives
operate, customize the reader to use the PC card software, and provide you
with helpful tools.
Note: Your reader is customized to use the PC card drivers and cards as efficiently as
possible. For help with advanced card configuration and power management, see the
SystemSoft CardSoft 3.1 Software User's Guide, which is stored as the executable
zipped file CSUG_DOC.EXE on companion disk 3. The guide is in Microsoft Word
2.0 format.
This section covers these topics:
• Drivers in CONFIG.SYS
• Drivers in AUTOEXEC.BAT
• Tips for Enabling PC Card Drivers
Drivers in CONFIG.SYS
Your CONFIG.SYS must contain these lines to support the PC card drive:
device=d:\cs.exe /poll 1
device=d:\csalloc.exe d:\csalloc.ini
install=d:\card_sr.exe
Note: If you delete or remark out these lines, you cannot use the PC card drives.
cardinfo /on:1
Or scan this bar code:
*CARDINFO /OON/Z1*
*CARDINFO /ON*
BC
NF
Using PC Cards in the Reader
4
4-29
Advertisement
Table of Contents
