Intermec Janus 2010 User Manual page 275

nugget
2. The Boot Loader menu appears. Press
3. Press
4. Type the new password and press
5. Type the new password again for verification and press
6. Select Resume from the Boot Loader menu.
To disable the password
1. Display the Boot Loader menu. For help, see the previous set of steps.
2. At the Boot Loader menu, press
3. Press
4. Press
5. Select Resume from the Boot Loader menu.
3 9
helconital
BOOT LOADER
Reboot
Password
Dump
Load
Resume
Storage
Off
2010U.055
e
. The PASSWORD screen appears.
PASSWORD
Please Type
Password *****
Enter to Continue
ESC to Quit
seven characters.
If you type the password incorrectly, you receive an error message and you
need to repeat Steps 4 and 5.
The reader resumes operating. You will be prompted for this password
when you attempt to display the Boot Loader menu or exit Storage mode.
e
e
. The PASSWORD screen appears.
twice without typing any other characters. This action disables
the password by creating a null password.
Booting and Resetting the Reader
j
until you highlight Password.
2010U.079
e
. Your password can contain up to
j
until you highlight Password.
9
e
.
9-9