Closing The Irl Desktop; Exploring The Irl Desktop User Interface - Intermec Janus 2010 User Manual

Intermec janus 2010: user guide

Hide thumbs Also See for Janus 2010:

Table of Contents

You can load a protocol handler or run a program when you start the IRL

Desktop by including one or both of these parameters in the command:

irl -[portph] [filename]

For example, to load the Intermec protocol handler on COM1 and open the IRL

Desktop, type this command at the DOS prompt:

Or scan this bar code:

To load the PC Standard protocol handler on COM2, open the IRL Desktop,

and immediately begin running the STOCK.IRL program, type this command

at the DOS prompt:

irl -2p stock.irl

Note: If you start an IRL program from the DOS prompt, you will return to the DOS

prompt when you exit the program.

Closing the IRL Desktop

To close the IRL Desktop, select Exit from the File menu and press

When you start the IRL Desktop, the main menu appears. In the menu bar,

there are two menus, File and About. The contents of the File menu appear

automatically.

is the number of the COM port for which you are loading the

protocol handler.

is the code for the protocol handler you want to load:

Intermec protocol handler

PC Standard protocol handler

RF protocol handler

is the name of the IRL program to run.

Working With IRL