Intermec Janus 2010 User Manual page 308

JANUS 2010 Hand-Held Computer User's Manual
nugget
Using MkImage and PutImage (continued)
Problem
Error, not enough
free conventional
memory to create
disk image
2010U.032
Error, not enough
free disk memory to
create output file
Error, could not
open image file
Error, image file
not found
2010U.035
Error, invalid image
file, recreate using
the MkImage command.
Error, not enough
free conventional
memory to run this
program.
10-26
3 9
helconital
Solution
Free some conventional memory and then try to run MkImage again. For
help, see "Making More Memory Available on the Reader" in Chapter 3.
There is not enough memory on your disk to create the MkImage output
file. Remove one or more files and free some disk space.
2010U.033
Verify that the image file exists and you have the correct path and filename
in the PutImage command and then try again.
2010U.034
Verify that the image file exists and you have the correct path and filename
in the PutImage command and then try again.
The image was created by a method other than MkImage, or you entered
the wrong filename in the PutImage command. Create the image file with
MkImage, and then try running PutImage again.
2010U.036
Free some conventional memory and try to run PutImage again. For help,
see "Making More Memory Available on the Reader" in Chapter 3.
2010U.037