Irl Sop (Start Of Program) - Intermec Janus 2010 User Manual

nugget

IRL SOP (Start of Program)

Purpose: Defines the beginning of an IRL program download from the host computer.
Note: You must select the communications port and protocol before you set the
parameters that define the protocol. For help, see the "Communications Protocol,
Configure" command earlier in this chapter.
Default: SI (shift in)
Syntax: XAdata
where data can be any ASCII character.
Scan: To disable SOP, scan this bar code:
Disable SOP
*$+XA*
*$+XA*
Or: To set SOP to an ASCII character:
1. Scan this bar code:
2. Scan a bar code for data from the "Full ASCII Bar Code Chart" in
3. Scan this bar code:
3 9
helconital
Enter Accumulate Mode / Set SOP
*+/$+XA*
*+/$+XA*
Appendix C.
Exit Accumulate Mode
*-/*
*-/*
Configuration Command Reference
12
12-67