Unloading And Loading Configuration Manager Tsr - Intermec Janus 2010 User Manual

JANUS 2010 Hand-Held Computer User's Manual
To unload the Reader Wedge TSR
• Type this command at the DOS prompt:

Unloading and Loading Configuration Manager TSR

Configuration Manager software performs two functions:
• Maintaining the reader's current configuration file and making sure that
• Letting you change the configuration file through a variety of methods.
These two functions are handled by separate processes running on the reader.
Both processes are started when you boot the reader. You cannot unload the
process that maintains the configuration, but you can unload the process that
lets you change the configuration.
The process that lets you change the configuration is the Configuration
Manager TSR (CFGTSR.EXE). After you configure a reader, you can unload the
Configuration Manager TSR and free 50K of conventional memory.
Note: While the Configuration Manager TSR is unloaded, do not run applications that
change the reader's configuration.
To load Configuration Manager TSR
• Type this command at the DOS prompt:
3-38
rwtsr -d
Or scan this bar code:
*RWTSR -D*
*RWTSR -D*
the reader operates according to that configuration.
cfgmgr
Or scan this bar code:
*CFGMGR*
*CFGMGR*
The reader displays the message, "Configuration Manager TSR X.XX."