Formatting A Flash Pc Card - Intermec Janus 2010 User Manual

JANUS 2010 Hand-Held Computer User's Manual
3. Press
4. Press the letter of the PC card drive. For example, press
5. Press
6. Press
7. Press

Formatting a Flash PC Card

1. Insert the flash card in the PC card drive.
2. Type this command at the DOS prompt:
4-20
3
to select Option 3. You will see this information.
Erase a partition.
Drive Beg address End address
G O
Which drive would you like to select?
Drive =
card in the Type II drive. The program displays the next prompt:
This command will erase drive G: entirely.
Do you want to continue (Y/N)?
Y
to begin erasing the flash card. The program displays the next
message and the percent complete as it erases the card. Do not remove the
flash card while the program is erasing the card.
DO NOT REMOVE CARD WHILE ERASING!
Erasing card.
100% complete
Press return for main menu.
e
to return to the MCFORMAT main menu.
d
to exit MCFORMAT. You are ready to format the flash card.
mcformat
Or scan this bar code:
*MCFORMAT*
*MCFORMAT*
Type Status
4194303 FTL Formatted 4096K
Size
2010U.166
G
to format a flash