Charging The Nicad Battery Pack - Intermec Janus 2010 User Manual

Charging the NiCad Battery Pack

The reader's nickel-cadmium (NiCad) battery pack is shipped to you
completely discharged of power, so you must charge the battery pack before
you can use the reader. There are four ways to charge the battery pack. For
help, see the JANUS accessory quick reference guides.
Note: To learn about using and maximizing the reader's battery power, see
"Managing Your Battery Power" in Chapter 2.
Method Description
Place the battery pack in the battery slot
of the communications dock.
Place the battery pack in the battery
charger.
Install the battery pack in the reader,
place the reader in the communications
dock, and connect an external power
supply to the dock.
2010U.010
Install the battery pack in the reader,
attach the optical link adapter to the
reader, and connect an external power
supply to the optical link adapter.
2010U.008
1
Getting Started
Time to Charge
About 2 hours
About 2 hours
About 15 hours (with
the reader turned off)
About 15 hours (with
the reader turned off)
1-7