Managing The Power On The Pc Card Drive - Intermec Janus 2010 User Manual

To replace the lithium battery in the SRAM card
1. Copy any files you want to save from the SRAM card to another drive on
2. Remove the card from the reader. For help, see "Inserting and Removing
3. Use the documentation that came with your SRAM card to replace the
4. Install the card in the reader. For help, see "Inserting and Removing PC
5. Format the card. For help, see "Formatting an SRAM PC Card" earlier in
6. Copy any files you saved in Step 1 back onto the SRAM card.

Managing the Power on the PC Card Drive

You can use a utility called CARDINFO.EXE to manage the power on the PC
card drive. You can also use CARDINFO.EXE to get information about the card
inserted in your JANUS reader.
You can run CARDINFO at any time to:
• display information about the type of card that is currently inserted in each
• turn on or off the power to a PC card drive when a PC card is installed in
• display the drive letter designation for your ATA PC card.
• display detailed information about the PC card and drive configuration,
• display the latest error that occurred for a PC card that is installed in a
the reader or to a host computer.
PC Cards" earlier in this chapter.
lithium battery.
Cards" earlier in this chapter.
this chapter.
PC card drive.
the drive.
including the I/O ports, interrupt request (IRQ) resources, and memory
areas that are being used by each card.
drive.
BC
NF
Using PC Cards in the Reader
4
4-27