Keypad Caps Lock - Intermec Janus 2010 User Manual

nugget
Example: You want to redefine the uppercase letter A to the [ (left square bracket). In the
Full ASCII Table, the hex value for [ is 5B. To redefine A, enter this command:
$+WM"A1A5B"
You can also change the Key Code Look-Up Table in IC.EXE.
To redefine A to [ in IC.EXE
1. From the Op menu in IC.EXE, select Key Codes.
2. Select Redefine.
3. Press
4. Press
5. To enter the hexadecimal value for [, press
6. Press
7. Exit IC.EXE and save your changes.

Keypad Caps Lock

Purpose: Turns the caps lock on and off. With the caps lock turned on, all alphabetic
characters you type on the keypad will be uppercase or capital letters. By
default, the reader turns the caps lock off when you boot the reader.
Caps lock off
Default:
Syntax: KAdata
Acceptable values for data are:
0
1
One of these bar codes:
Scan:
Caps Lock Off
*$+KA0*
*$+KA0*
Caps Lock On
*$+KA1*
*$+KA1*
3 9
helconital
u A
.
j
to move to the next field.
e
.
Caps lock off
Caps lock on
Configuration Command Reference
1 A 5 B
12
.
12-69