Eof (End Of File) - Intermec Janus 2010 User Manual

nugget
8 x 20 (lines by characters)
*$+DS2*
*$+DS2*
16 x 10 (lines by characters)
*$+DS3*
*$+DS3*
8 x 10 (lines by characters)
*$+DS4*
*$+DS4*

EOF (End of File)

Purpose: Defines the end of file character for the communications port when
transmitting a file from the reader.
Note: You must select the communications port and protocol before you set the
parameters to define that protocol. For help, see the "Communications Protocol,
Configure" command earlier in this chapter. The configured option may be overridden
when you use certain communications protocols. The EOF will not be overridden when
you use User-Defined protocol.
Default: Disabled
Syntax: FAdata
where data can be any ASCII character.
Scan: To disable EOF, scan this bar code:
Disable EOF
*$+FA*
*$+FA*
3 9
helconital
Configuration Command Reference
12
12-51