Setting The Path With An Environment Variable - Intermec Janus 2010 User Manual

nugget
The next sections describe these tasks:

• Setting the Path With an Environment Variable

• Including a Data File Path in the OPEN Command
• Selecting the Path From the IRL Desktop
Setting the Path With an Environment Variable
You can use the IM_IRLPROG and IM_IRLDATA environment variables to set
the paths for programs and data files. You can include the environment
variables in your AUTOEXEC.BAT file or type them at the DOS prompt.
To set the path for IRL programs with an environment variable
• Follow this command format:
To set the path for IRL data files with an environment variable
• Follow this command format:
3 9
helconital
set IM_IRLPROG=[drive:][\directory]
where:
drive is the letter of the drive where you will store programs.
Note: You can set IM_IRLPROG to any drive, even one that you
cannot write to.
directory is the directory or directories where you will store programs.
For example:
set IM_IRLPROG=e:\sales\programs
set IM_IRLDATA=[drive:][\directory]
where:
drive is the letter of the drive where you will store data files.
Note: If you set IM_IRLDATA to a drive you cannot write to,
the reader defaults to the drive that was current when you opened
the IRL Desktop. If you cannot write to that drive, IRL uses the
reader's first writable drive.
is the directory or directories where you will store data files.
directory
For example:
set IM_IRLDATA=e:\sales\data
7
Working With IRL
7-13