Choosing The Display Sizes And Parameters - Intermec Janus 2010 User Manual

2
Learning How to Use the Reader

Choosing the Display Sizes and Parameters

By default, the reader's display is configured with these values:
• 25 lines by 80 characters (full-sized virtual screen)
• Normal width characters
• Scroll at line 16
• Normal height characters
You can configure the reader's display to the sizes and parameters listed in the
next table. If you select the 25 x 80 display size, you can customize the
character width, character height, and the line at which the display scrolls;
otherwise, those parameters are preset to match the display size.
One reason you may want to configure the display is to support the
applications you run on the reader. For example, if you are running a JANUS
PSK application designed to fit the reader's 16 x 20 screen, you may choose the
16 x 20 display size.
For help changing the configuration, see Chapter 5, "Configuring the Reader,"
or the "Display Setup" command in Chapter 12.
Note: If you are working at the DOS prompt, Intermec recommends that you set the
display size to 25 x 80 or you may see inconsistent display results.
2-21