Interpreting The Server's Status Screen - Intermec Janus 2010 User Manual

JANUS 2010 Hand-Held Computer User's Manual
nugget
3. Press
On the host computer, the Interlnk Server Status screen is updated with
information about the redirected drives. For help, see "Interpreting the Server's
Status Screen" later in this chapter.
You are ready to start using your Interlnk connection. For example, if the
client's drive H is redirected to the server's floppy disk drive A, type this
command at the client's DOS prompt:
h:
Or scan this bar code:
*H/Z*
*H:*
All commands you type at the client's drive H prompt affect the server's
drive A.

Interpreting the Server's Status Screen

When you start Intersvr, the server displays a status screen that contains two
columns of information:
6-30
3 9
helconital
a f .
to warm boot the reader. A command in the reader's
CONFIG.SYS file automatically loads Interlnk into the reader's memory.
Caution
Do not press any keys while the reader is performing a warm boot or you
may lose data.
Conseil
N'appuyez pas sur des touches pendant que le lecteur se réamorce, sinon
vous pouvez perdre des données.
Microsoft Interlnk Server version 1.00
This Computer Other Computer
(Server) (Client)
_____________ ______________
A: equals D:
B: equals E:
C: equals F:
D: equals G:
E: equals H:
LPT3: equals LPT1
Transfer: Port = Com 1 Speed: Alt + F4 = Exit
2010U.071