Resuming Irl Programs; Exiting A Program So You Can Resume It Later - Intermec Janus 2010 User Manual

nugget
4. Press
5. Press
6. To exit and save your changes, you must select OK at both Change
7. Use the IRL Desktop to perform another task.

Resuming IRL Programs

You can exit an IRL program, perform other functions (such as execute DOS
commands, run other IRL programs, or put the reader in Suspend mode), and
then resume the IRL program exactly where you left off.

Exiting a Program So You Can Resume It Later

You can resume an IRL program if you exit it using one of these methods:
• Execute the IRL Program, Exit (/$) command. You can scan a bar code that
• Add to your IRL program an Exit command with a D modifier (ED). When
• Press the application break sequence, as described in "Breaking Out of an
You can exit multiple programs that can all be resumed later. IRL creates a
filename.RSM file in the data file path for each program, where filename is the
program name. The .RSM file contains information that lets IRL resume the
program exactly where you left off. IRL deletes the .RSM file when you run or
resume the program.
3 9
helconital
The second Change Directory screen
appears.
j h
or to select the disk drive for the
path.
m
to move to the Directories field,
j h
and then press or
directory for the path.
If the drive does not contain directories,
(none) appears under the Directories
heading, as shown in the second Change
Directory screen.
Directory screens. Press
e
press . The first Change Directory screen appears. Again, press
you select OK, and then press
contains the command, or send the command from a host computer.
the ED command executes, the program terminates and returns you to the
DOS prompt.
Application" in Chapter 9.
to select the
m
until you select the OK button, and then
e
.
7
Working With IRL
IRL
Change Directory
Path:
C:\
Disks Directories
C: (none)
D:
E:
G:
OK Cancel
?
2010U.007
m
until
7-15