Intermec Janus 2010 User Manual page 292

JANUS 2010 Hand-Held Computer User's Manual
nugget
Operating the Reader (continued)
Problem
The Battery icon appears at the top of
the reader display.
You see all these symptoms:
•
The Battery icon remains on.
• The reader chirps every 5 seconds
for 1 minute and then turns off.
• The reader double-beeps when
you enter or scan data, and
double-clicks when you press
any key.
You see all these symptoms:
•
The Battery icon is not displayed.
• The reader chirps every 15
seconds for 1 minute and then
turns off.
• The reader double-beeps when
you enter or scan data, and
double-clicks when you press
any key.
• The Backup Battery screen
appears each time you turn the
reader on.
10-10
3 9
helconital
Solution
The reader displays the Battery icon when the NiCad battery pack
has approximately 15 to 45 minutes of power left. If you are using a
J2010, replace the battery soon.
For a JANUS 2010 with RF Back, you should immediately replace or
recharge the battery pack because you will soon lose RF
communications.
Caution
When the Battery icon appears, save your data and replace
the battery pack as soon as possible.
Conseil
Quand l'icône de la pile apparaît, enregistrez vos données et
remplacez le jeu de piles aussitôt que possible, sinon vous
pourriez perdre des données.
The NiCad battery pack charge is critically low.
Save your data. Replace the battery pack with a spare charged
battery pack, charge the battery pack, or attach an external power
supply.
The laser scanner (or wand) and RF communications are turned off
15 seconds after the first chirp.
The lithium backup battery is critically low.
Keep a charged NiCad battery pack installed in the reader. You can
also attach an external power supply. Save all your data and back
up all the files that are on drive E.
Contact your Intermec service representative to replace the lithium
backup battery.