Intermec Janus 2010 User Manual page 288

JANUS 2010 Hand-Held Computer User's Manual
nugget
Powering Up or Booting the Reader (continued)
Problem
During a warm boot, the reader
cannot finish booting and displays
an error message.
When the reader finishes booting,
an icon remains on at the top of its
display.
10-6
3 9
helconital
Solution
If you press a key (especially
booting, you may see the message, "XX Keyboard Error, Press F1
or F2," where XX is a status code such as FA. Press
error screen and the reader continues booting.
Caution
Do not press any keys while the reader is performing a warm
boot or you may lose data.
Conseil
N'appuyez pas sur des touches pendant que le lecteur se
réamorce, sinon vous pouvez perdre des données.
Contact your Intermec service representative. When the reader
boots, the CPU starts all power cycles and turns all icons (except for
Battery) on and off. The icons turn off very quickly as the reader
passes a series of bootstrap code checks. Any icon that remains on
indicates where the bootstrap code failed.
c a u f
or ) while the reader is
m
to exit the