Scanner Mode - Intermec Janus 2010 User Manual

nugget
Syntax: SSdata
Acceptable values for data are:
0
1
2
3
4
5
6
Scan: One of these bar codes:
All Compatible Scanners
*$+SS0*
*$+SS0*
1500 Laser Scanner
*$+SS2*
*$+SS2*
1545 Laser Scanner
*$+SS4*
*$+SS4*
155x Laser Scanners
*$+SS6*
*$+SS6*

Scanner Mode

Purpose: Defines how the scanner operates when the trigger is pulled. There are two
types of modes:
• One-Shot mode requires you to pull the trigger each time you want to scan
• Automatic mode allows you to pull the trigger once and scan a series of bar
3 9
helconital
All compatible scanners
146x CCD scanners
1500 laser scanner
151x laser scanners
1545 laser scanner
Compatible Symbol scanners (with reverse polarity enabled)
155x laser scanners
a bar code. Once you scan a bar code, the scanner turns off.
codes. When you release the trigger, the scanner turns off. To scan the same
bar code more than once, you must release the trigger or scan a different
bar code before attempting a second scan.
Configuration Command Reference
146x CCD Scanners
*$+SS1*
*$+SS1*
151x Laser Scanners
*$+SS3*
*$+SS3*
Compatible Symbol Scanners
*$+SS5*
*$+SS5*
12
12-85