Nortel DMS-100 Series Reference Manual page 91

Extended peripheral module

Hide thumbs Also See for DMS-100 Series:

Table of Contents

Datafilling table RCCINV

Note: When you enter data in field C-side link table (CSLNKTAB), make sure message links are

not assigned to the same interface card. When the interface card supports two or more links,

separate the message links by the number of links on the interface cards. This action applies to all

interface link types: DS-1, DS30, DS30A, or PCM-30. If an attempt to assign message links is

made on the same interface card, table control issues a warning. The assignment of message links

to the same interface card can cause an E1 outage (failure of all message links). The E1 outage

can occur if the card fails.

DMS-100 Family XPM International Translations Reference Manual XPM12 and up

see subfields

Datafilling BAS on RSC-S International

Basic call processing

Explanation and action

Extension shelf. Enter Y if the CPM has an

extension shelf. If Y, the refinements to this

field are listed below.

Note: Enter the location of the extension shelf

in fields EXTFRTYP, EXTFRNO, EXTSHPOS,

EXTFLOOR, EXTROW, EXTFRPOS,

EXTEQPEC, and EXTSIDE (L or R).