Nortel DMS-100 Series Reference Manual page 488

5-28 Datafilling Remote Switching Center Multi-Access
Remote Switching Center Multi-access (RSC-M)
The datafill for basic call processing for table LTCINV appears in the
following table. Fields that apply directly to basic call processing appear.
Refer to the data schema section of the Translations Guide for a description
of the other fields. The system adds a field that contains the name of the
loadfile for the electrically erasable programmable read-only memory
(EEPROM).
Datafilling table LTCINV
Subfield or
Field
refinement
LTCNAME
XPMTYPE
XPMNO
FRTYPE
EQPEC
LOAD
EXECTAB
TRMTYPE
EXEC
Note 1: Make changes to fields with multiple entries in the PROMPT mode. In nonprompt mode,
you can leave out current entries.
Note 2: Enter the continuation mark (+) in fields with multiple possible entries when more data is
specified on the next line or more records are entered. Enter the end mark ($) in fields with multiple
possible entries after the last entry.
297-8331-815 Standard 10.02 March 2004
Entry Description
refer to Link trunk controller name. Subfields:
subfields XPMTYPE and XPMNO.
PLGC XPM type. Enter PLGC.
Note: This entry is PLGC for an LGCOi+.
0 to 255 XPM number. Enter the number of the XPM.
see list Frame type. Enter LGE for the LGCOi+. Enter
the location of the C-side PM in fields FRNO,
SHPOS, FLOOR, ROW, and FRPOS.
alphanumeric Product equipment code. Enter the frame PEC.
alphanumeric Load. Enter load for PM use. The load must
display a load that appears in table PMLOADS.
TRMTYPE, Executive table. Subfields: TRMTYPE, EXEC,
EXEC and CONTMARK. Enter the terminal type and
associated execs together.
refer to list Terminal type. Enter the terminal models to be
used. The POTS is for normal lines, KSET for
MBS terminals, ABTRK for normal trunks, and
RMM_TERM is for MTC trunks.
alphanumeric Executive programs. Enter the execs for the
terminal type.
—continued—
(continued)