Nortel DMS-100 Series Reference Manual page 179

Datafilling ISDN on RSC-S International 3-155
ISDN operations
(continued)
Enter load information for table RCCINV in field LOAD. Load
information for table RCCINV corresponds to the LOADNAME tuple
from table PMLOADS. The RCCNAME tuple in table RCCINV
corresponds to the RCCNAME tuple from table RCCPSINV. The field
RCCNAME stores site information entered in field NAME from table
SITE. The field RCCNAME also stores the PM type and the PM
number.
Table RCCPSINV contains only the P-side link assignments for the
RCO2. When the system adds a tuple to table RCCINV, the system adds
an equivalent tuple in table RCCPSINV. For maintenance control
information about the peripheral the CARRIDX field indexes to table
CARRMTC. The RCCNAME tuple in table RCCPSINV matches the
RCCNAME tuple from table RCCINV. The RCCNAME tuple in table
RCCPSINV stores site information entered in field NAME from table
SITE. The RCCNAME tuple in table RCCPSINV stores the PM type
and the PM number.
Table LCMINV lists the data assignment for each bay associated with a
local line concentrating module (LCM). Table LCMINV lists the data
assignment for each bay associated with a remote line concentrating
module (RLCM) unit. Field SITE in table LCMINV matches the NAME
tuple from table SITE. This field identifies the equipment for the
switching unit and for all remote locations that connect to the switching
unit. The LOAD field in table LCMINV matches the LOADNAME
tuple from table PMLOADS. This field stores the device location of
each PM load file.
Table LNINV lists data for each line card slot. The LEN tuple in table
LNINV corresponds to the LEN tuple in table LTMAP.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up