Nortel DMS-100 Series Reference Manual page 348
Extended peripheral module
Hide thumbs
Also See for DMS-100 Series:
- Replacement procedures (1100 pages) ,
- Maintenance manual (762 pages) ,
- Manual (543 pages)
Table of Contents
Advertisement
4-98 Datafilling BAS on RSC-S UK / Europe
Basic call processing
Note 2: The system assigns an LTU to the host switching. The horizontal
that the LTU is assigned to is multiplied to the minibar switches assigned to
the host switching unit. When an LTU is assigned to a remote location, the
horizontal is multiplied to all minibar switches assigned to the remote
location.
Note 3: The minibar switch is in the host switching unit. The assignment of
incoming test and operator verification trunks does not have a limit. Each
incoming test access trunk and operator verification trunk requires one
horizontal.
Note 4: The MTA configuration is small or medium. The horizontals where
the incoming test access and operator verification trunks are assigned are
multiplied to all minibar switches. The minibar switches are located at the
host switching unit.
Note 5: When the minibar switch is remote from the host switching unit, the
horizontals are available.
The horizontals are available for the following:
Each incoming test access trunk and operator verification trunk requires one
horizontal. Each vertical is located on the host minibar switch assigned to a
horizontal on the minibar switch. The minibar switch is located at the
remote or host location. Each vertical requires one horizontal.
Note 6: The maximum number of metal jacks at each DMS office is 256.
Note 7: Refer to tables CLLI, TRKGRP, TRKSGRP, and TRKMEM.
Refer to these tables for an assignment of the following
Note 8: You must enter an LTU or MTU in table TRKMEM before you add
the LTU to table MTAHORIZ. You can delete the LTU or MTU from table
TRKMEM. The system marks the associated tuple in table MTAHORIZ as
deleted. The addition of the LTU or MTU to table TRKMEM restores the
tuple.
297-8331-815 Standard 10.01 August 1999
(continued)
assignment of incoming test access trunks
operator verification trunk
extension of the metal test access feature
LTUs
incoming test access and operator verification trunks to:
— trunk group
— trunk subgroup
— trunk member tables
Advertisement
Table of Contents
