Nortel DMS-100 Series Reference Manual page 331

Entry example for table TRKGRP
A sample entry for table TRKGRP appears in the following example.
MAP display example for table TRKGRP
Datafilling table Trunk Subgroup (TRKSGRP)
Table TRKSGRP lists the additional information for each subgroup assigned
to a trunk group that appears in table TRKGRP.
You must specify input data for a minimum of one subgroup or a maximum
of two subgroups for each trunk group in table TRKGRP. Trunk groups
defined as maintenance (MAINT) group types do not require this
information.
The datafill for table TRKSGRP appears in the following table. The table
contains the fields that apply to basic call processing. Refer to the data
schema section of the Translations Guide for a description of the other
fields.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Table: TRKGRP
GRPKEY
–––––––––––––––––––––––––––––––––––––––––––––––––––
VER90
TTT
TTU
LTU
RLMVER90
OG_1 TO
OG_2 TO
RSCTIP
TI 0 ELO
RCO20IBNTO
IBNTO 0 ELO NCBN RCO20 0 MIDL 0
0 N O 1 8 9 N N N N N N N $
RCO20IBNTI
IBNTI 0 ELO NCRT RCO20 0 0 3204001
0 Y N N Y N Y Y 0 0 N N N N N $
Note: The trunk group entry automatically produces the subgroup data
for maintenance and test trunks. This action does not apply to subgroup
1 of trunk groups with code TTU.
Datafilling BAS on RSC-S UK / Europe 4-81
Basic call processing
MAINT 0 NPDGP NCRT
MAINT 0 IAO NCRT
MAINT 0 IAO NCRT
MAINT 0 IAO NCRT
MAINT 0 IAO NCRT
0 TLD NCRT
0 TLD NCRT
NCRT IE NPRT NSCR 704 LCL
(continued)
GRPINFO
2X90AB
2X96AA
2X47AA
2X11AA
2X90AB
IE MIDL 7 N
IE MIDL 4 N
N N
N ANSDISC
ANSDISC