Nortel DMS-100 Series Reference Manual page 41

Add the SITE option to field CONDITION. Enter field SITE when
CONDITION equals SITE. This change affects the following tables when
the selector is set to CND:
The SITE condition allows a call to transfer to a route list or an element in a
route list according to the origin of the call. Compare the site of the call
with the site defined in field SITE. If the two sites match, the call proceeds
as field RTETYPE indicates and refinements of field RTETYPE. In another
occurrence, the call proceeds to the next route element in the route list.
The following pages describe the fields in tables OFRT and IBNRTE for
conditional routing. The fields in table OFRT are the same for subtable
HNPACONT.RTEREF and for subtable FNPACONT.RTEREF.
Table OFRT
The entries for basic call processing for table OFRT appear in the following
table. Fields that apply directly to basic call processing appear in the table.
For details on table OFRT, refer to the data schema section of the
Translations Guide.
Datafilling data in table OFRT
Subfield or
Field
refinement
RTE
RTELIST
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
table IBNRTE
table OFRT
subtable HNPACONT.RTEREF
subtable FNPACONT.RTEREF
Note: To optimize this feature, trunk groups must be different by site.
Each member of each trunk group must belong to that site.
Entry
0 to 1023 or
blank
refer to
subfields
Datafilling BAS on RSC-S International 3-17
Basic call processing
Description
Extended route reference index. Enter a value
from 0 to 1023. If the record is the first in the
route list, enter the route reference number
assigned to the route list. At other times, leave
the entry blank.
Route list. This field contains subfields
RTESEL and the RTESEL set-equal-to-CND
refinements CONDITION and CONDRTE.
—continued—
(continued)