Nortel DMS-100 Series Reference Manual page 270

4-20 Datafilling BAS on RSC-S UK / Europe
Basic call processing
Datafilling table OFRT for basic call processing
Subfield or
Field
refinement
SITE
TODNAME
TIMES
TOP_CND_
RTE
CONDRTE
RTETYPE
RTEREF
Note 1: Make changes to fields with multiple entries in the PROMPT mode. The nonprompt mode
allows current entries to be left out.
Note 2: Enter the continuation mark (+) in fields with multiple possible entries when the next line
specifies more data or you have more records to enter. Enter the end mark ($) in fields with multiple
possible entries after the last entry.
Note 3: You can enter data in Field SITE only after the user enters data in table SITE. Table site
must define entries in field SITE.
297-8331-815 Standard 10.01 August 1999
(continued)
(continued)
Entry Description
HOST or Enter in field SITE, HOST or a site name
alphanumeric entered in table SITE.
TOD The selected condition to match is time of day.
perform next entry.
alphanumeric Enter in field TODNAME the name assigned to
the entry in the table TIMEODAY.
0 to 9 or Enter in field TIMES the times, to a maximum of
A to F 14, when the transfer to another route listing
occurs.
TOPEACLS The selected condition is a match of the
incoming call class-of-service to the entry in
field TOP_CND_RTE. Perform next entry.
alphanumeric Enter the selected TOPS class of service that
the call must match.
refer to If a match in CNDSEL selects this route,
subfields subfields RTETYPE, RTEREF, SKIPNUM,
EXTREID, TABNAME, INDEX define the
conditional route
ST, SK,T Route type of the selected transfer.
Refinements are another route list in the same
table (ST), skip (SK) entries in route table and
route to specified table (T) and index. Refer to
the following entries.
1 to 1023 ST, same table specified. Enter in field
RTEREF the number of the route reference
element to transfer call routing.
—continued—