Nortel DMS-100 Series Reference Manual page 375

Datafilling PCM-30 trunks on RSC-S UK / Europe 4-125
PCM-30 R1 Trunking
(continued)
Table SITE identifies equipment for the switching unit and for all remote
locations that connect to the switching unit. This table must contain data
before you can assign a LEN or enter a PM. The host switching unit is
the first entry in field NAME. Field LTDSN associates with the number
required to dial the site and alarm data for remote sites.
Table PMLOADS stores the device location of each peripheral module
(PM) loadfile to map between the load names and load devices. Table
PMLOADS must contain the PM loadfiles before the load files in the
inventory tables can use the loadfiles.
Table CARRMTC allows the DMS switch administration to enter
maintenance control information in peripherals. Table CARRMTC
allows the DMS switch administration to enter out-of-service (OOS)
limits for alarms and system return-to-service (RTS) occurrences. The
TMPLTNM tuple in table CARRMTC corresponds to field CARRIDX
in tables LTCPSINV and RCCPSINV.
Table RCCINV maintains a list of RCO2s entered in the DMS switch
and that contains inventory data for the RCO2s. The inventory data does
not include P-side link assignments. The table information identifies the
location of the RCO2, the load and execute lineups required and the
network link connections. Table RRCINV contains the C-side DS-1
assignments and for the RCO2. Table RRCINV contains intraswitching.
Table RCCPSINV contains the P-side link assignments for the RCO2.
For each tuple added to table RCCINV, the system adds the tuple that
corresponds in table RCCPSINV. This table uses field LOAD to identify
load information. Field LOAD corresponds to the LOADNAME tuple
from table PMLOADS. Field CARRIDX indexes table CARRMTC for
maintenance control information about the peripheral. The RCCNAME
tuple in table RCCPSINV corresponds to the RCCNAME tuple, from
table RCCINV. The RCCNAME tuple stores site information first
entered in field NAME from table SITE, the PM type and the PM
number.
Table TRKGRP defines data for each trunk group that associates with
the switching unit. Field CLLI in table TRKGRP corresponds to the
CLLI code for the trunk group.
Table TRKSGRP lists additional information for each subgroup assigned
to one of the trunk groups listed in table TRKGRP. Field CLLI in table
TRKSGRP corresponds to the CLLI code for the trunk group.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up