Nortel DMS-100 Series Reference Manual page 273

the data schema section of the Translations Guide for a description of the
other fields.
Datafilling table IBNRTE for basic call processing
Subfield or
Field
refinement
RTE
RTELIST
IBNRTSEL
CONDITION
CONDSEL
SITE
Example of entries for table IBNRTE
The following is an example of entries for table IBNRTE.
MAP display example for table IBNRTE
In this figure, route list 1, element 1 sends the call to route list 2 if the call
origination is HOST. If the call originates at REM1, the DMS sends the call
to route list 3. If the call originates at REM2, the system routes the call to
route list 4.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Entry
0 through
1023 or
blank
refer to
subfields
CND
refer to
subfields
SITE or other
selector
condition
alphanumeric
RTE RTELIST
CONDRITE
________________________________________________________
1 (CND SITE HOST ST 2) (CND SITE REM1 ST 3) (CNS SITE REM2 ST 4)
2 (S N N N G0) (S N N N G1) (S N N N G2)
3 (S N N N G1) (S N N N G0) (S N N N G2)
4 (S N N N G2) (S N N N G0) (S N N N G1)
Datafilling BAS on RSC-S UK / Europe 4-23
Basic call processing
Explanation and action
Extended route reference index. If the record is
the first on the route list, enter the route
reference number assigned to the route list. If
the record is not the first on the route list, leave
the entry blank.
Route list. The field contains subfields
IBNRTSEL, CONDITION and CONDRTE.
IBN or MDC route selector.
Condition. This field contains subfields
CONDSEL, SITE, TODNAME, TIMES,
COSMAP, and CALLCHR.
Condition selector. Enter SITE as the type of
condition if the origin determines selection.
Site. Enter the name of the site in table SITE.
IBNRTSEL CONDSEL
(continued)
SITE