Pcm-30 R1 Trunking - Nortel DMS-100 Series Reference Manual

3-126 3-126 Datafilling PCM-30 trunks on RSC-S International

PCM-30 R1 Trunking

Functional group
BAS00012
Feature package
NTXT00AA PCM-30 RSC-S R1 Trunking
Release applicability
XPM05 and later versions
Requirements
The PCM-30 R1 Trunking requires the following feature packages:
Description
The PCM-30 RSC-S R1 Trunking software package provides P-side
trunking off the RSC-S. This package uses the P-side of the RCO2 to
terminate trunks from community dial offices (CDO) and private branch
exchanges (PBX). This package supports line-to-trunk, trunk-to-line, and
trunk-to-trunk calls.
Operation
Does not apply
Translations table flow
The PCM-30 R1 Trunking translations tables appear in the following list:
297-8331-815 Standard 10.01 August 1999
NTXH52AA PCM-30 RSCO Support
NTXK77AA PCM-30 RSCO-S Support
NTXP92AA RSC-S Basic
Table common language location identifier (CLLI) identifies the far end
of the trunk group. The CLLI identifies the far end of the trunk group by
the following:
— name of city or town
— state or province
— building group
— destination of the traffic unit
— code that identifies groups that terminate at the same CLLI location
3-126