Nortel DMS-100 Series Reference Manual page 56

Extended peripheral module
Hide thumbs Also See for DMS-100 Series:
Table of Contents

Advertisement

3-32 Datafilling BAS on RSC-S International
Basic call processing
Data entry tables for basic call processing
Table
CLLI
SITE
PMLOADS
LTCINV
CARRMTC
LTCPSINV
RCCINV
RCCPSINV
LCMINV
297-8331-815 Standard 10.01 August 1999
(continued)
Purpose of table
Common language location identifier. Codes identify the far end of each
announcement, tone, trunk group, test trunk, national milliwatt test lines
and service circuit.
Site. Site contains data that allows the DMS system to recognize the
equipment for the switching unit and remote locations that use the
switching unit.
Peripheral module loads table. The PMLOADS table stores the device
location of every peripheral module (PM) load file. The PM load files
must map between the load names and devices where the loads reside.
This table permits autoload to locate load files without the intervention of
personnel. Enter the expanded peripheral module (XPM) load files in
table PMLOADS before you use the XPM load files in the XPM
inventory tables.
Line trunk controller inventory. Contains the inventory data, except the
P-side link assignment, for PM types. Table LTCINV defines the
PCM-30 line group controller (PLGC) or line group controller offshore
(LGCO) on the C-side of the RCO2.
Carrier maintenance control. Allows the DMS switch administration to
enter maintenance control information in peripherals, and OOS limits for
alarms. The DMS switch administration also enters system
return-to-service (RTS) occurrences.
Line trunk controller P-side link inventory. Contains the assignment of
the P-side links for XPM peripherals.
Remote cluster controller inventory. Contains inventory data, except
P-side link assignments, for the RCO2. Enter C-side DS-1 assignments
for the RCO2 in table RCCINV.
Remote cluster controller P-side link inventory. Contains the P-side link
assignments for the RCO2.
Line concentrating module inventory. Lists data assignments for each
bay for a local line concentrating module (LCM) or remote line
concentrating module (RLCM) unit.
—continued—

Advertisement

Table of Contents
loading

Table of Contents