Nortel DMS-100 Series Reference Manual page 189

Datafill requirements for ISDN operations
Table
LTMAP
KSETFEAT
KSETKEYS
Note 1: Data entered in some data tables must be in relation to the type of trunk group required.
Each trunk group type requires a specific form. Valid trunk group types are TI, TO, T2, IBNTI,
IBNTO, IBNT2, PX, and ES.
Note 2: Examples of the datafill of tables required to operate ISDN features appear in the next
section. Specific tables are also required for basic call processing. Datafill examples for these
tables are shown in the basic call processing section.
Note 3: In tables with fields with multiple possible entries the continuation mark (CONTMARK)
indicates more entries for the tuple on the next line. The continuation mark (CONTMARK) is a plus
sign (+). A dollar sign ($) indicates the end of entries.
Datafilling table DATASIZE
Table data size (DATASIZE) specifies the size of certain tables. For basic
rate interface (BRI), table DATASIZE must specify the size needed for table
SPECCONN. If the size is set too small, table SPECCONN will be
corrupted. The datafill example for table DATASIZE shows the fields that
apply to the ISDN on RSC. Refer to the data schema section of the
Translations Guide for a description of the other fields.
Datafilling table DATASIZE for ISDN on RSC-S
Subfield or
Field
refinement
DATSKEY
SIZE
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
(continued)
Purpose of table
Logical terminal map. Maps the ISDN LTs to a LEN or the TEI, from
table LTDEF. The AP determines if LTMAP maps the LTs to a LEN or
the TEI.
Keyset feature. Associates feature appearances and ISDN LT feature
activators and indicators with feature instances and various feature
options.
Keyset keys. Defines business set feature key templates. This table
also assigns dedicated keys used on a varity of business sets.
—end—
Entry
alphanumeric
0 to 32767
Datafilling ISDN on RSC-S International 3-165
ISDN operations
Explanation and action
Data size key. Enter the name of the table
where the SIZE field will apply. If you use BRA,
the table SPECCONN will be sized.
Table size. Enter the required size of the table.
(continued)