Nortel DMS-100 Series Reference Manual page 497

Remote Switching Center Multi-access (RSC-M)
Datafilling table CARRMTC
Subfield or
Field
refinement
ATTR AIS16OST
(continued)
AIS16RST
CRCOST
Note 1: The DMS switch adds the first tuple for the RSC-M to table CARRMTC during IPL or first
restart after IPL. The CAS is SIGNTYPE of the default tuple and the switch cannot delete or change
this tuple.
Note 2: Add tuples other than the default tuple before the tuples can be referenced in the table
RCCPSINV.
Note 3: Out-of-service timers in the AMC must be greater than the equivalent timers in the DMS
switch.
Note 4: Return-to-service timers in the AMC must be smaller than the equivalent timers in the DMS
switch.
DMS-100 Family XPM International Translations Reference Manual, ISN06 (TDM)
Datafilling Remote Switching Center Multi-Access 5-37
(continued)
Entry
numeric
(0 to 255)
4=400 msec
numeric
(0 to 255)
4=400 msec
numeric
(0 to 255)
5=500 msec
—continued—
Description
OOS time for AIS16 alarm. Enter the OOS time
for the AIS16 alarm. This value appears in
units of 100 ms.
The default value for this field is 4.
RTS time for AIS16 alarm. Enter the RTS time
for the AIS16 alarm. This value appears in
units of 100 ms.
The default value is for this field is 4.
OOS time for CRC4 alarm. Enter the OOS time
for the CRC4 alarm. This value appears in
units of 100 ms.
The default value for this field is 5.
(continued)