Nortel DMS-100 Series Reference Manual page 269

Datafilling table OFRT for basic call processing
Subfield or
Field
refinement
CONDITION
(continued)
CALLCHR
COSMAP
EA_CND_
RTE
PERCENT
Note 1: Make changes to fields with multiple entries in the PROMPT mode. The nonprompt mode
allows current entries to be left out.
Note 2: Enter the continuation mark (+) in fields with multiple possible entries when the next line
specifies more data or you have more records to enter. Enter the end mark ($) in fields with multiple
possible entries after the last entry.
Note 3: You can enter data in Field SITE only after the user enters data in table SITE. Table site
must define entries in field SITE.
DMS-100 Family XPM International Translations Reference Manual XPM12 and up
Datafilling BAS on RSC-S UK / Europe 4-19
Basic call processing
(continued)
Entry Description
CALLCHR The selected condition is a match of field
CALLCHR. Use a call characteristic from table
CALLCHR. Perform next entry.
alphanumeric Enter the name of the selected call
characteristic from table CALLCHR.
COSMAP The selected condition is a match to class of
service map (COSMAP) field. Perform next
entry.
alphanumeric Enter the name of the selected NCOS mapping
entry from table COSMAP.
EA The selected condition is use equal access
conditional routing. Field EA_CND_RTE.
defines condition. Perform next entry.
CAC, INTNL, Enter one of the following selectors: carrier
or PIC access code (CAC), international access
(INTNL), or presubscribed interexchange carrier
(PIC).
INTERLATA Index into table TRKLATA to obtain originating
LATA of calling number. Index into table
LATAXLA of called number to determine
inter-LATA or intra-LATA status.
RND The selected condition to match is a percent of
randomly selected calls. Perform next entry.
0 to 100 Enter percentage of calls that the system must
route conditionally.
SITE The selected condition is a match of the site
where the call originates. Perform next entry.
—continued—
(continued)